- Home
- Refrigerator Water Filters
- Whirlpool 4396841 Refrigerator Water Filter (Filter 3)
Whirlpool 4396841 Refrigerator Water Filter (Filter 3)
Whirlpool 4396841 is the genuine Whirlpool Filter 3 cartridge for base-grille water filtration systems. It is certified to NSF/ANSI 42 and 53 and rated for 200 gallons (757 L) or six months of service.
4396841 is the Whirlpool part number for the base-grille Filter 3 cartridge, used with the T2RFWG2 filter body. Its certified performance is narrower than the current Filter 3 cartridge, and the figures on this page are the ones the manufacturer publishes for 4396841 itself.
Under NSF/ANSI 42 the cartridge is certified for chlorine taste and odor and Class II particulates. Under NSF/ANSI 53 it is certified for mercury, benzene, toxophene, o-dichlorobenzene and carbofuran. Rated service capacity is 200 gallons (757 L). Some manual revisions for this part also carry a lead-reduction compliance statement, while earlier revisions do not.
Service flow is 0.85 gpm at 60 psi in the later manuals and 0.50 gpm in earlier ones. Supply pressure is rated 30–120 psi and water temperature 33–100 °F. Replace the cartridge every six months, or sooner if flow falls noticeably, and flush the system after installation as described in the refrigerator’s user instructions.
The current replacement part is EDR3RXD1, which is a different cartridge with a broader certified contaminant list. Performance figures from EDR3RXD1 should not be applied to 4396841.
Packaging may vary between production batches. Warranty is handled under the manufacturer’s standard terms; contact us for the details that apply to your order.
- 4396841 is the replacement cartridge named in Whirlpool-family manuals for the T2RFWG2 base-grille water filtration system.
- Certified for chlorine taste and odor reduction and for Class II particulate reduction.
- Five named contaminants — a shorter certified list than the current Filter 3 cartridge carries.
- Rated service capacity is 200 gallons (757 L), with a six-month replacement interval.
- Later manuals rate service flow at 0.85 gpm at 60 psi; earlier revisions for the same part list 0.50 gpm. Both are recorded here rather than averaged.
- The current replacement is EDR3RXD1, a different cartridge with a broader certified list; the two should not be treated as performance-equivalent.
| Brand | Whirlpool |
|---|---|
| Part Number | 4396841 |
| Filter Life | 6 months |
| Filter Capacity | 200 gallons (757 L) |
| Flow Rate | 0.85 gpm (3.2 L/min) @ 60 psi; earlier revisions list 0.50 gpm (1.9 L/min) |
| Operating Pressure (psi) | 30–120 psi (207–827 kPa) |
| Operating Temperature (°F) | 33–100 °F (0.6–37.8 °C) |
| External Testing Certification | NSF/ANSI 42 and 53 |
| Contaminants Reduced | Chlorine taste and odor; Particulate Class II; Mercury; Benzene; Toxophene; o-Dichlorobenzene; Carbofuran |
| Also Known As | T2RFWG2 |
| Flush Requirement | Flush the water system after installation; follow the refrigerator user instructions. |
Part numbers this filter crosses to. If the cartridge you are removing is labeled with one of them, this filter is the one to order.
Refrigerator model numbers this filter fits, as shown on the appliance rating label. Look for yours in the list below.
Some model cross-references in this list come from third-party parts retailers. Confirm the part number on your appliance's rating plate before ordering.
Add a review Cancel reply
Genuine Whirlpool product. Depotfilter is an independent reseller and is not affiliated with, authorized by, or sponsored by Whirlpool. All trademarks are the property of their respective owners.


Reviews
There are no reviews yet.