- Home
- Refrigerator Water Filters
- EveryDrop EDR1RXD1 Refrigerator Water Filter (Filter 1)
EveryDrop EDR1RXD1 Refrigerator Water Filter (Filter 1)
EveryDrop EDR1RXD1 is the current genuine Filter 1 cartridge for Whirlpool, Maytag, KitchenAid, Amana, JennAir and Kenmore refrigerators. It is certified to NSF/ANSI 42, 53 and 401 and rated to reduce 70 contaminants.
EDR1RXD1 is the current EveryDrop Filter 1 cartridge, identified by its purple colour. It is a push-in filter measuring 2 in × 2 in × 7.5 in, and EveryDrop lists it for bottom-mount, French-door, side-by-side and top-mount refrigerators from Amana, JennAir, Kenmore, KitchenAid, Maytag and Whirlpool.
EveryDrop certifies the filter to NSF/ANSI 42, 53 and 401, and the performance data sheet also lists CSA B483.1. The manufacturer states certified reduction of 70 contaminants, including microplastics, heavy metals and volatile organic compounds; its published list names twelve, among them lead, mercury, benzene, carbofuran, endrin, toxophene, turbidity and Class I particulates.
Rated capacity is 200 gallons (757 L) where the refrigerator uses PID, and 100 gallons (379 L) where it does not; EveryDrop recommends a six-month change in either case. Service flow is 0.50 gpm at 60 psi, with a supply range of 30–120 psi and 33–100 °F. Flush the system after installation as described in the refrigerator’s user instructions.
EDR1RXD1 is the current replacement for the earlier W10295370A part number. That page is maintained separately so buyers can compare the two part numbers directly.
Packaging may vary between production batches. Warranty is handled under the manufacturer’s standard terms; contact us for the details that apply to your order.
- EDR1RXD1 is the current Filter 1 part, supplied in EveryDrop’s purple Filter 1 livery and fitted with a push-in connection.
- Certified to NSF/ANSI 42, 53 and 401, with CSA B483.1 also listed on the performance data sheet.
- EveryDrop’s certified claim covers 70 contaminants; the published list names twelve, including lead, mercury, benzene, carbofuran, endrin, toxophene, turbidity and Class I particulates.
- EveryDrop states 99% microplastic reduction and certifies the cartridge under NSF/ANSI 401 for emerging compounds.
- Rated for 200 gallons (757 L) in systems with PID and 100 gallons (379 L) in systems without it, with a six-month change interval.
- The cartridge measures 2 in × 2 in × 7.5 in and uses a push-in connection, with a 0.50 gpm service flow at 60 psi.
| Brand | EveryDrop |
|---|---|
| Part Number | EDR1RXD1 |
| Material | Coconut shell-based activated carbon core |
| Product Dimensions | 2 × 2 × 7.5 in (D × W × H) |
| Filter Life | 6 months |
| Filter Capacity | 200 gallons (757 L) with PID; 100 gallons (379 L) without PID |
| Flow Rate | 0.50 gpm (1.89 L/min) @ 60 psi |
| Operating Pressure (psi) | 30–120 psi (207–827 kPa) |
| Operating Temperature (°F) | 33–100 °F (0.6–37.8 °C) |
| Installation Type | Push-in |
| External Testing Certification | NSF/ANSI 42, 53 and 401; CSA B483.1 |
| Contaminants Reduced | 70 contaminants claimed by the manufacturer; named: 2,4-D, Asbestos, Benzene, Carbofuran, Cysts, Endrin, Lead, Mercury, P-Dichlorobenzene, Particulates Class I, Toxophene, Turbidity |
| Also Known As | EDR1RXD1B; WHR1RXD1; KAD1RXD1; EDR1RXD1R |
| Flush Requirement | Flush the water system after installation; follow the user instructions. |
Part numbers this filter crosses to. If the cartridge you are removing is labeled with one of them, this filter is the one to order.
Refrigerator model numbers this filter fits, as shown on the appliance rating label. Look for yours in the list below.
Some model cross-references in this list come from third-party parts retailers. Confirm the part number on your appliance's rating plate before ordering.
Add a review Cancel reply
Genuine EveryDrop product. Depotfilter is an independent reseller and is not affiliated with, authorized by, or sponsored by EveryDrop. All trademarks are the property of their respective owners.


Reviews
There are no reviews yet.